Tools And Materials Required For Splicing

tools Materials required for Tubular Wire or Selma fids areavailable in a variety of sizes depending onthe rope type and diameter youre for extracting cores or pushing a fidthrough the ropeTa p e Masking tape electrical tape or a similarplastic tape can be used during or KnifeFor cutting away strands must be sharptwineGood quality nylon braided or twisted twinein a size adequate for the rope diameterbeing spliced See pgs 10 13 for sizingtwine for whipping and lock stitchingR u l e r o r Ta p e m e a s u r eMarking pen splicing training kit The Samson Splice Training Kit comes complete with a fid pusher instructions and 2 lengths of double braided ropes splicing kit The Samson Splicing Kit comes with 5 aluminum tubular fids size range 14 through 12 diameterWire and Aluminum Tubular fids Our wire fids are 12 scale meaning that the selma fids length of the tool is 12 the actual fid length Made from highly polished stainless steel for the corresponding rope diameter Selma Fids are patented worldwide Available Tubular Fids are 100 scale meaning in sets only the Selma Fid may be used to that the overall length of the tool is splice hollow braided lines from 18 equal to the actual fid length to 916 or double braid and for the corresponding 3strand rope up to 118 rope diameter 2090 Thornton Street T 3603844669 20062008 Samson Rope Technologies All rights reserved Ferndale WA USA 98248 F 3603840572