Friday, July1, 2022
Privacy Policy
L-36.com

Winch Service Manual for Barient No. 3 - Halyard-1969


I. Remove screw (#15) from inside top of drum (#13).

2.Remove drum (#13) from base (#1). 3. Remove brake screw (#4), swivel pin (#5), brake handle assembly (#6) by unscrewing from base (#1). 4. Remove anchor pin (#7) from base (#1) using small pointed object. 5. Remove brake band (#3) and ratchet ring (#8) from base (#1). 6. Inspect 2 pawls (#11) and 3 pawl springs (#12) on drum (#13). (Do not remove unless broken.) 7. Carefully wash all parts including inside of drum (#13). 8. Grease inside of drum (#13). 9. Oil 2 pawls (#11) on drum (#13). 10. Assemble brake band (#3) to base (#1). 11. Assemble anchor pin (#7) through brake band (#3) and onto base (#1), checking alignment of anchor pin hole with brake band hole. 12. Assemble brake screw (#4), swivel pin (#5), brake handle assembly (#6) through brake band (#3). (Do not tighten securely until winch assembly completed.) 13. Assemble ratchet ring (#8) onto drum (#13) noting correct position of pawls. 14. Assemble drum (#13), ratchet ring assembly (#8) to base (#1) noting the fitting of roll pin (#2) on top of base (#1) to hole in drum retainer (#10). 15. Assemble screw (#15) inside top of drum (#13) and tighten.



Please read website Cookie, Privacy, and Disclamers by clicking HERE.